Homemade ferrule

Homemade ferrule смотреть последние обновления за сегодня на .

How to Make a Ferrule Crimper or Swaging Tool - BIKE LOCK ONLY, NO LOAD ON THIS CABLE - 52

84649
436
69
00:04:56
17.06.2019

I needed to remove the frayed part of the cable I use to lock my bike and re-crimp the end. The tool for this, a swaging tool is expensive, so I made a jig for it. Patreon For anyone who might want to help: 🤍

How to make an Awl with a Brass Ferrule.

58414
2699
70
00:08:50
02.08.2019

In this episode of Tool Making Bob makes a strike-able awl with a olive wood handle and brass ferrule. An awl is an important tool for any boat builders toolbox let alone any craftsman It's really an essential tool that everyone needs. I've always had a Stanley awl which has worked really well for me. One of the thing I like about it is that the metal shaft runs through the handle. I can strike it with an hammer with out damaging the handle. So one would be able to punch leather or things like that. I'd be looking for a small lathe project and decided that an awl would be a great small project. I made this awl with and olive wood handle, a brass ferrule, and a tapered polished shaft. All metal parts are easily found at my local hardware store. awl (/ôl/)noun: awl; plural noun: awls a small pointed tool used for piercing or punching holes, especially in leather and canvas for sail making. PLANS FOR THE AWL Patrons at the Skipper or above tier get free access to the Plan for the Awl. 🤍 “If you’re going to make it, make it beautiful.” -Bob Emser- Subscribe for more Boat Building from The Art of Boat Building: 🤍 Share this video with a friend: 🤍 How to support The Art of Boat Building. Purchase Official Merchandise here: 🤍 Become a Patron: 🤍 Watch next Recommended Playlists Carvel Planking Playlist: 🤍 Haven 12 1/2 Playlist: 🤍 Tool Making: 🤍 Let’s connect: Facebook: 🤍 Instagram: 🤍 Twitter: 🤍 Linkedin: 🤍 Bob Emser American Sculptor: 🤍 Video equipment used: CanonM50: 🤍 Takstar SGC-598 (shotgun mic): 🤍 Saramonic Lavalier Mic 🤍 Disclaimer: Some of these links go to one of my websites and some are affiliate links where I’d earn a small commission if you make a purchase at no additional cost to you. #theartofboatbuilding #artofboatbuilding #makeitbeautiful#woodenboatbuilding #buildingasmallboat #buildingasailboat #shipwright #toolbuilding #Haven12 #herreshoff #shipwright

How I Make Copper Ferrules

38303
638
68
00:07:46
18.06.2015

This is a short video showing how I make copper ferrules from copper tubing. The copper is metal and it is important to be careful to avoid cuts and nicks.

How to make a Knife Ferrule

45034
432
96
00:04:42
26.05.2014

I have finally got around to making this much requested video on how to make a ferrule for hidden tang knives. It is not a complicated process and one that I learned by just playing around with pieces of junk I had in my shop. I use 3/4 inch diameter, thick wall, copper water pipe tubing to make ferrules.

Самодельная оковка для финки.-Homemade ferrule for puukko/

23417
188
15
00:03:44
06.03.2016

Оковка для финского ножа из трубки смесителя (водопроводного крана) своими руками.

How to Make a Simple Knife Ferrule

269
1
2
00:06:26
06.05.2019

In this video I show you how to make a brass ferrule/finger guard for your knife. This is part of a series where I show step by step how to make a partial tang knife. I show each step and then the finished products. Subscribe for the rest of the series!

Homemade Battery Cable Lugs (Dirt Cheap!)

42802
1335
144
00:04:23
13.06.2020

How to save a lot of money by making your own copper battery cable end lugs, or cable ring terminal connectors. These homemade battery cable lugs are ideal for auto, marine, solar, and much more for high current applications. Enjoy the video! USED IN VIDEO: 16T Hydraulic Crimper Kit: 🤍 Inexpensive Hammer Crimper: 🤍 Rigid Tubing Cutter: 🤍 Heat Shrink Kit: 🤍 Reamer: 🤍 Type K Copper Pipe: Local Store or Plumbing Supply House My Bench Vise: 🤍 Mill Files: 🤍 Mini Heat Gun: 🤍 Klien Plier/Reamer: 🤍 (Amazon Affiliate & Banggood Links) Link To Pipe Size/Wire Size Charts: 🤍 Support the creation of new videos on this channel by watching the ads placed on my videos, shopping for items shown in my videos at the Amazon/Banggood links provided above and continuing to use the supplied links for future purchases, and/or by making a Paypal donation. All donations, big or small, are greatly appreciated. Thank you! Paypal link: 🤍 Bobby Tectalabyss: Thanks for your generous $5 donation! Jeff Barr: Thanks for your generous $25 donation! xrayjim: Thanks for your generous $25 donation! Ryan Pedersen: Thanks for your generous $20 donation! Wanda Thomas: Thanks for your generous $50 donation! Peter Hines: Thanks for your generous $10 donation! Verinspec: Thanks for your generous $10 donation! Jason Enright: Thanks for your generous $6 donation! Diega Kendrick: Thanks for your generous $10 donation! Technovative Products: Thanks for your generous $5 donation! Jeff Karrow: Thanks for your generous $5 donation! Iven Brown: Thanks for your generous $5 donation! Thomas Herrick: Thanks for your generous $20 donation! Richard Frisch: Thanks for your generous $10 donation! Bruce Howard: Thanks for the generous $5 donation! Jayantha Gabbalage: Thanks for the generous $20 donation! Joseph Vanderbosch: Thanks for the generous $10 donation! Thanks For Watching! *If you enjoy watching my videos, then be sure to SUBSCRIBE & click the notification bell(set to "ALL"), SHARE links to my videos with others, rate "THUMBS UP", and check out my extensive video playlists for many other videos of interest to you. Doing so helps to ensure that many more videos will be uploaded to my YT channel in the future.*

How to Clamp a Wire Rope Ferrule Sleeve Without a Swaging Tool With a Hammer and Punch

18058
136
25
00:08:39
11.03.2022

An example of ferrule / sleeve on Amazon: 🤍 Wire rope: 🤍 Swaging tool / swager: 🤍 How to clamp / crimp a wire rope ferrule / sleeve without a swaging tool, instead with a hammer and punch. DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission paid by the advertiser and not by you. Reference: how to 040

FERRULE CRIMP TOOLS - Hexagonal, Square & Trapezoidal #shorts

3219177
43496
94
00:00:19
24.09.2021

Ferrules come in all sorts of shapes and sizes. So do the tools used to crimp ferrules. 🔦 More electrical short videos from eFIXX 👉🤍 Top Tips, hacks, and sneak peeks in 60 seconds or less. AD 🛠FEATURED FERRULE CRIMP TOOLS Wiha - Hexagonal - 🤍 Knipex - Square - 🤍 Knipex - Trapezodial - 🤍 📍SUBSCRIBE TO THE CHANNEL eFIXX helps electricians, electrical contractors, building services engineers, and electrical apprentices. So if you've been on the tools for years or just starting your electrical journey, we'll help you stay up to date with the latest regulations and developments in the electrical industry. 👉🤍 ⚡️ Take a deep dive into the latest electrical products, applications and technology 👉 🤍 = #efixx #shorts #ferrules

How to Clamp a Wire Rope Ferrule Sleeve Without a Swaging Tool With a Hammer and Punch

28843
135
15
00:02:29
13.04.2021

An example of ferrule / sleeve on Amazon: 🤍 Wire rope: 🤍 Swaging tool / swager : 🤍 How to clamp / crimp a wire rope ferrule / sleeve without a swaging tool, instead with a hammer and punch. DISCLAIMER: This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission paid by the advertiser and not by you. Reference: how to 025

Ferrules

15718
949
90
00:12:25
19.03.2018

WW'nTIp-of-Day #052: Ferrules Ferrules are the unsung hero in tool design as they keep you handle from self destructing. Today's discussion discusses ferrules and offers tips on how to get a proper fit. Bonus: Graham Blackburn 🤍 We depend upon patrons like you to fund our channel. It's the time away from 'real work' that is our biggest expense. So if you feel these videos and series are of value to you and others please consider shopping and patronizing these sites: - 🤍 - 🤍 - 🤍 - 🤍 - 🤍 - 🤍

Square Tipped Centering Woodworking Awl w/ a Brass Nut Ferrule - How to Make

33637
656
49
00:04:49
17.03.2016

A brass nut, an old bit, and a piece of scrap is all that's needed to make a centering awl with a square pyramid tip that is great for woodworking projects of all levels. The square tip helps to ream a hole, where as a round awl just splits the wood. Project 20. This project is base on this blog post by Paul Sellers: 🤍 Follow me on Twitter to get almost daily updates and have your input as a project is progressing. 🤍 John Z Zhu ALL RIGHTS RESERVED

Throttle Cable Solder Repair Tool - Simple Fix!

4149513
43040
1683
00:06:16
14.07.2016

Repairing a throttle cable with a simple homemade tool in just minutes. Easy and functional. Check it out! #throttle #cable #homemade #easy #fix #DonnDIY #eestiyoutuber Donations accepted at: 🤍 Blueprints available at: 🤍

How to Make Rope Ferrule Clamps and Rod Leashes.

39064
509
78
00:07:29
04.08.2018

How to make ferrules and rod leashes from common copper pipe. Pipe Cutter with Reamer: 🤍 SOATMON Blog page: 🤍Soatmon.com SOATMON Amazon Page: 🤍

Viewer Brazing Tips | CCVM Build | Brazing Copper To Stainless Ferrules

89850
1236
140
00:13:51
15.06.2017

You guys helped me out with a bunch of kick ass brazing tips and tricks. This week I want to thank you for helping me out and share what you taught me about how to braze copper to stainless with any other newbies wanting to learn. First up I share all the tips and tricks, after that I run through what I make this week. Making a few more parts for the CCVM still. Don’t forget to check the comments, that’s where the real magic happens. SUBSCRIBE 🤍 LETS CONNECT! 🤍 🤍 🤍 🤍 COOL COMUNITIES 🤍 🤍 🤍

TOP 10 BEST HOMEMADE GARDEN TOOL

6713744
63627
649
00:13:54
21.12.2019

Hi everyone! You can find fun diy projects, crafts, recycle ideas, home decoration, restoration, toys, life hacks, homemade and handmade awesome ideas videos in my channel. Hope you enjoy my channel. Do not forget to click like, comment, share and subscribe. See you in my next video. SUBSCRIBE - 🤍 - Other video!!! Populer videos - 🤍 Super Glue Life Hack - 🤍 Broken Old Tools Ideas 🤍 Easy And Useful Craft Ideas - 🤍 - #diy #tool #tools #idea #awesome #homemade WARNING! Dear friends! My videos are provided only for entertainment and watching purposes only. So do not try to repeat everything you see in my videos. No one is liable for any loss or damage caused by your reliance on information contained in my videos. Entertain yourself but always be safe and take care of your health. Song: NOWË - Horizon (Vlog No Copyright Music) Music provided by Vlog No Copyright Music. Video Link: 🤍

YOU NEVER SEEN THESE 4 WIRE ROPE IDEAS BEFORE

905782
5532
113
00:06:37
12.03.2020

You have never seen these 4 ideas with wire rope SUBSCRIBE-🤍 Other video!!! Popular videos-🤍 Awesome life hack -🤍 3 Drill Machine Life Hacks You Should Know-🤍 How to make -🤍 Welcome to MR SUNY channel Our channel include of guiding videos: - Life hack -DIY -How to make -Awesome ideas -Tips You are interested in handiwork, craft or you just have nothing to do, haven't you? You have found the channel you really need. Here you can find lots of crafts, hand made items, and the main thing is that they all made of make-shifts and at the lowest cost!

Do you crimp your own hoses? Its so easy!!

426559
5290
254
00:04:59
20.07.2018

AIR, Argon, Oxygen, Acetylene, etc. Repair them easily with cheap parts! How inconvenient to stop working and run to the weld shop for a hose repair. Hose clamp?? No way!! Use this more professional looking method. OK infomercial script aside.....I have used this hose crimper for a while now and it has proven invaluable. The ferrules are available in a wide variety of sizes online or locally. The crimping tool is much cheaper than you'd expect. Same with the ferrules. Certainly worth considering adding it to your kit. Thanks for watching!! LINKS!! Be sure to measure your hose, inside and out, before ordering VISE-CRIMPER 🤍 BENCH TOP CRIMPER: 🤍 Air hose ferrules (5/8 OD hose) 50pk 🤍 12 pk 🤍 Air hose ferrules (3/8 OD hose) 50 pk 🤍 12 pk 🤍 1/4 to 1/4 barb 12pk 🤍 3/8 to 1/4 barb 12pk 🤍 3/8 to 1/4 barb 10pk 🤍 TORCH HOSE REPAIR WITH TOOL 🤍

Build a Simple Modular Pot Still Head + How to Solder Copper to Stainless Steel.

101220
3331
454
00:14:47
29.10.2020

Today I’m building pieces that can be used for a very simple modular copper still head and condenser to fit on any 2” tri-clamp ferrule. Through research, trial and error I learned how to solder copper to stainless steel. I hope watching me stumble through this can help you figure it out quicker😊 Links to materials below. *Options if you'd like to support Bearded & Bored:* Shirts & Drinkware - 🤍 Patreon Monthly Contribution: 🤍 Monthly Contribution through YouTube = click the JOIN button next to the Subscribe button. One Time Contribution to help me buy supplies: 🤍 Liquid Flux – 🤍 Silver Solder – 🤍 MAP Gas Torch - 🤍 2” Stainless Steel Ferrules and Triclamps – 🤍 2” PTFE Triclamp Gaskets - 🤍 2” Copper Pipe Sections – 🤍 1” to 2” Copper Reducer - 🤍 1” Copper Pipe – 🤍 1/2” to 1” Copper Reducer - 🤍 ½” Copper Pipe - 🤍 Shop at Amazon using these affiliate links to help support my channel without costing you anything extra. As an Amazon Associate I earn from qualifying purchases. Disclaimer: This video may contain a simulation of the process of distillation filmed for entertainment and educational purposes only. The equipment depicted is solely for the production of distilled water and essential oils. The information on the process is provided for its entertainment and educational value only. Distillation of alcohol is currently illegal at the U.S. Federal level if done without a license, even for the sole purpose of personal consumption. Understand and follow Federal and State laws when making alcoholic beverages. If you attempt this project, you assume all risk. Please drink responsibly. TWITTER - 🤍 Intro music - “Yes Ma’am” by Cullah is licensed under an Attribution-ShareAlike License. Check him out. He's Awesome! 🤍 Outro Music - "I've got a Plan To Rule The World" - by Cullah is licensed under an Attribution-ShareAlike License. #HowToSilverSolder #HowToSolderFerrules

Cutting ferrule stations for bamboo fly rods

1271
10
0
00:00:54
05.06.2020

Bamboo fly rods: Using an inexpensive diamond hole saw to cut a ferrule station to 0.257" for a size 16 ferrule. Final fitting is done with a file.

Wire Ferrules - BEST Amp Connection - WHEN TO CRIMP!?

1544048
17453
546
00:09:39
06.06.2018

Wire ferrules are a thin copper tube that is tin plated and they really help to clean up our car audio installs and make them more robust. With a wire ferrule we can prevent wires from fraying, we can easily un-install and re-install the wire multiple times without issue, and the wire ferrule securely attaches to the wire in our amplifier or processor. But when do we crimp ferrules and when can we use the amp terminal to crimp them with the set screw? Let's find out! New MICRO AMPS from AudioControl! Learn more here: 🤍 ▼ Tools and Materials: ➜ Crimper Tool & Ferrules - 🤍 ➜ 0 Gauge Wire Ferrules - 🤍 ➜ 4 Gauge Wire Ferrules - 🤍 As an Amazon Associate I earn from qualifying purchases. 🔊 Want more? Check out these links: ✅Car Audio Tutorial Library: 🤍 ✅ FREE weekly training program: 🤍 ✅ Box Designs, BUILD YOUR OWN BOX!: 🤍 ✅Join the CAF Patreon Member Team: 🤍 🔊🔊🔊 FULL VIDEO SERIES PLAYLISTS:🔊🔊🔊 - Ported Downfiring Subwoofer Build: 🤍 - Dad's Sound Quality Daily Driver Build: 🤍 - SEMA F150 Subwoofer Box Build: 🤍 - LOUD Wrangler Build - 🤍 - SQ Grand Cherokee Build - 🤍 - Stealth Hidden Bass SQ Build - 🤍 Here at Car Audio Fabrication I teach you how to Master Car Audio in an effort to Design, Build, and Install your ideal car audio system. Whether you are a hardcore basshead or a HiFi focused audiophile I would love to have you subscribe and join our community! SUBSCRIBE 🤍 LET”S CONNECT!— Website: 🤍 Facebook: 🤍 Instagram: 🤍caraudiofab Snapchat: 🤍caraudiofab Music: Switch It Up - YouTube Audio Library Licensed under Creative Commons: By Attribution 3.0 Car Audio Fabrication – Master Car Audio – Design, Build, Install

Cue Making - Ferrule Installation with Live Tooling

71172
151
11
00:04:40
24.12.2013

This is per a request to see if it's feasible to install a ferrule & tip using all live tooling. If you have ANY questions, please contact me through my website 🤍 as I will not respond to comments here.

Making your own Hose Clamps for Experimental aircraft

4170877
45813
1134
00:06:07
03.06.2017

Hose clamps are used in many areas of an Experimental Aircraft project: fuel lines, water hoses, oil hoses, etc. This video show a demonstration of a small tool that allows a builder to fabricate any size hose clamp from stainless steel wire in just minutes. This is also a great emergency tool for repairing/replacing hose clamps in a hurry.

Pimp My Staff- Walking Stick Maintenance, Decoration and Optimisation- Alpine Ferrule, Burn Designs

183876
5783
270
00:10:22
22.05.2020

Useful links for spikes and other walking stick accessories: 🤍 🤍 🤍 If you would like to SUPPORT THE CHANNEL, you can become a PATRON via my Patreon page: 🤍 Or you can make a one off donation via the Paypal link: 🤍 If you would like to get in contact with me and keep up to date with events, here is my Facebook page: 🤍 You can also follow me on my Instagram page: 🤍 #walkingstick #woodwork #hiking

Voltlog #223 - Is The Paron JX-D5 Crimping Tool Any Good?

119331
1243
105
00:07:18
20.04.2019

In this video we are taking a look at the Paron JX-D5 affordable crimping tool set which was provided for free by banggood.com for the purpose of this review. This single inexpensive crimping tool can do wire ferrules, blade connectors, dupont connectors, jst connectors and more but is it any good? In this video I am testing the tool in various use cases, performing multiple crimps on different style of connectors and then check the end result. Are you looking for a cheap crimping tool that is able to handle multiple types and sizes of connectors? The Paron JX-D5 might be the right one for you, watch the video to find out more. →Paron JX-D5 Crimping Tool 🤍 →Support the channel via Patreon, Paypal or Bitcoin 🤍 →Blog Post 🤍 #VoltLog #Review #Crimping

Door Handle Ferrule Installing tool for 1930 1940 Chevy GMC trucks.

251
6
0
00:01:56
18.05.2022

Door handle Steel Ferrule Installing tool for 1930s and 1940s Chevrolet and GMC trucks.

Cue Tip Installation-Tiger

1664475
3746
123
00:06:45
27.02.2010

Cue Tip Installation using the leather cutting blade. Instructional DVD by Tiger Products. For more information visit 🤍tigerproducts.com

How To Use Ferrule Crimping Tool for beginners / Review And complete Details

2775
53
18
00:05:54
05.05.2021

🤍 Coupon code:AMT408U5XVGYM in this video I'll show you how to use Ferrule Crimping Tool. review and complete Details about this Tool with Practically Use. about how many mm Ferrule lug and about cable sizes also. Crimping a bootlace ferrule to the end of a stranded conductor or fine wire is an easy way to improve the reliability of an electrical connection. In this video, we explore what can happen to conductors when you don't use a ferrule crimp. repairing tech with Yasir #ferrule_crimping_tool

Oil painting brush assembling machine for ferrule and handle

1991
17
0
00:00:16
30.03.2021

Oil painting brush assembling machine Oil painting brush production machines wechat/whatsapp:008615898837969 Skype: bestwoodmachine E-mail: mntools🤍126.com Mobile: 0086-15898837969

Making Heavy Metal Cones

191074
8528
656
00:13:05
11.09.2021

This video shows how to make cones from 1/8-inch (3.2mm) steel, using simple shop-made equipment. I have lots more YouTube videos, and here's a link to my website - which lists 20 full-length videos you can rent, stream, or download, plus the Covell line of fine-quality metalworking tools: 🤍 You can see the great Covell shirts, cups, and stickers here: 🤍 Special thanks to all my sponsors on Patreon: Trevor Kam, Jonathan K, William Longyard, Dominic Peterson, Jonathan Hodgins, Ben Hengst, Bill Kerr, Christopher Culbreath, Wes Fullenwider, Gordon Stipe, Teemu Vartiainen, Matt Maurin, Terry Doss, Clifton Ballad, R Rickel, Donald Summers Sr., Luke Hares, Matthew Schumacher, Nicolas Audouard, Todd Henry, DHFG, Corey Brabant, Nick Rosati, and Don Cober.

Ferrule Crimper Pliers and ferrules- tool storage with Kaizen foam

1678
81
14
00:03:25
31.08.2019

How I store my Iwiss ferrule crimper pliers in my shop using Kaizen Foam. In this video I continue organizing my shop by putting together a kit, storing both ferrules and the HSC8 6-6 crimping tool in one spot. I create foam inserts like these in my Harbor Freight Small Parts Storage cases to hold items too large for the included bins. By organizing single function tools and hardware in one spot it ensures they are together when needed and the foam makes it obvious when a tool is missing. 🔴 Subscribe! 🤍 As an Amazon Associate I earn from qualifying purchases. (paid links) Iwiss Ferrule Crimper: 🤍 Ferrule Assortment: 🤍 #PeteMakes #FromTheWorkshop

How to crimp wire rope ferrules Copper (Diy)

199814
771
25
00:01:09
12.09.2017

Go to copper ferrules: 🤍 Copper ferrules are used for stainless steel wire rope. With the special swage tools you can press the copper.

Assemble process of brush head and ferrule, Private label makeup brushes manufacturing

950
53
0
00:00:31
30.04.2021

Vonira beauty brush factory is efficient in producing real high-grade handcrafted makeup brushes. As a worldwide manufacturer of handcrafted makeup brushes, we understand the importance of quality raw materials in producing premium quality makeup brushes. Since 2001, Vonira's original brush workshop has developed high-end makeup brushes custom private labels for various brands. For more than 20 years of manufacturing world-class makeup brushes, we had mastered the art spirit of handcrafting custom makeup brushes. Company website: 🤍​ How do you think your makeup brushes are made? This video can show you how to make a brush head. Weight the hair, shape the hair, tie the hair, put it into a ferrule. Ta-ta, here is a brush head come out. Mail address: vonirabrush🤍voniracosmetics.com WhatsApp: +8615173200981 QuickChat: 🤍

Watch how clean spark plugs #shorts

75614
2743
65
00:00:42
17.10.2022

Spark plug tester: 🤍 Watch how clean spark plug in engine degreaser solution

Wire Ferrules Explained: Why are Ferrules Used and How are Ferrules Crimped

239786
1282
79
00:06:21
18.03.2015

Electrical Terminal Service (🤍electerm.com) has you covered when it comes to wire ferrules, including bare ferrules, insulated ferrules, twin ferrules, and ferrule crimping tools. This video first demonstrates what ferrules are and why they're used. It then demonstrates three crimping tools to properly crimp ferrules. Items demonstrated in this video: Rotating Head Crimping Tool: FER TOOL ROTO Gun Type Crimping Tool: FER TOOL 24-10 Gun Type Crimping Tool Kit: FERTOOL28-10KIT Production Crimping Tool: FER TOOL STRAP All ferrules, tools and kits can be found here: 🤍 Feel free to contact us - 🤍electerm.com, 248-549-2233

Traditional Chair Glide with Ferrule Installation

4568
14
2
00:00:42
12.02.2015

Order now at: 🤍 Equipping your furniture with swivel or non-swivel glides will allow for easy restructure of your classroom when the new school year begins and aide well when having to move furniture for floor cleaning purposes.

Назад
Что ищут прямо сейчас на
Homemade ferrule Random js array value система водоснабжения на даче (BLACK RUSSIA RP CRMP MOBILE) games for 2gb graphics card and 4gb ram ANURA KUMARA Scroll image on hover CSS ดราก้อนแฮตซ์พีจีล่าสุด 接盤 все киногрехи Росомаха: Бессмертный ГТА САМП как запустить внешник тапочки из старого полотенца фары мазда 6 монтаж печей сваты 6 NOBAR JEPANG ВОПРОС ОТВЕТ anycubic chiron issue resolved Следственный комитет